QIK Troffer Retrofit LED Light Bar Kit

These lights are super easy to install and work very well. I am beyond impressed with these and I will be using them again when I renovate my basement and my garage in the spring!

Excellent product, easy to install and looks great !

Install took less time than it did to gather the ladder and screw driver needed to remove the old ballasts from the light fixture. Great product.

Easy installation 5 basement light bays converted in less than an hour. Already have recommended this product to a friend.

QIK Troffer Retrofit LED Light Bar Kit

QIK Troffer Retrofit LED Light Bar Kit

Great product. Super easy to install. Works as expected. I’d buy more if needed.

Excellent product. Easy installation. Would recommend this product.

I even did the conversion. Very easy but there were no directions included with product. There is a 2 minute video for directions.

Nice and easy to install!!

all-good

I'd heard about retro kits in box stores that required creating jumper wires and replacing light socket tombstones. But after researching, this kit seemed easier. I'm glad I went this route. Took 15 minutes per fixture to remove ballast and old tombstones. Then snap up the new light strips and controller, hook white to white and black to black. Bug nuts. Done! So bright...will be doing more retros soon.

Easily installed.

I ordered the 2 x QIK Troffer RETRoFIT LED Light Bars. It arrived in good conditions. I used a screw to removed the bad transformer from the fixture and installed the new transformer and Retrofit LED light bars without any tools. They came with magnet attachments and needs no tools. It is very easy to do.

Quick and easy.

love these lights

Quick and easy.

Purchased the retro light bar to replace current LED light strip that was failing, plugged in and worked with no change to hardware or wiring. Magnetic tube was great! Former energizer worked. Ordered more for the other 3 office lights going out.

extremely fast shipping great customer service

Everything was fine.

Easy to install and very bright, great product

QIK Troffer RETRoFIT LED Light Bars

QIK Troffer RETRoFIT LED Light Bars

QIK Troffer RETRoFIT LED Light Bars

Work great thank you

I purchased 4 of the 2x4 manetic mount troffer retrofit kits. When the order was delivered it was missing several of the led strip magnets. A quick email explaining the situation and more magnets were shipped out right away. Now for the lights themselves...super easy install. Pull the old components out, stick the led strips and driver module in the troffer, and wire it up. The two led strips produce as much or more light than the 4 flourescent tubes it replaced at 1/4 the power consumption. I only ordered 4 at the time to test them out but we have many more fixtures that will be getting replaced in the future. Overall very pleased with the product.

We bought two sets of light bars for our church and we will be buying more!

Purchased 2 3-strip RETRoFIT kits. Received in lighten speed, Removal of the out Troffer light guts took 5 minutes, installation took less than that. Super happy with the outcome, nice bright light and only a fraction to operate compared to the old florescent lamps and hands down cheaper then replacement units. Will be buying 6 more to complete the conversion.

Install was very easy and quick. It took longer to take the old fluorescent stuff out of the fixture. You could leave it in the fixture if you want. Great product.

It worked great.

I am not a contractor but do a lot of home improvement projects.
I needed to convert a large and awkward 6' long fluorescent pendulum light into LED as the balasts went out and I have always hated the fluorescent lights. Using this kit made the whole thing a breeze!

For anyone who's considering this kit I'll give you the quick step-by step on how to use it.
1-Turn off electricity to the light
2-Take the fluorescent light down and apart to expose the balasts
3-Cut the hot and neutral wires as close to the balasts as possible to leave the longest tails
4-Remove the balasts and all the coffins that hold the fluorescent bulbs.
5-You should now just have the shell of the light.
6-Using a step-bit or a sequence of increasing size bit open up one of the coffin mounting holes to allow for the LED plugs.
7-Using the magnet place the LED strips on to the light body where the old bulbs used to sit.
8-Insert the tails through the enlarged holes so they are now inside the body where the ballasts used to sit
9-Mount the LED converters in the body using the magnets that come attached
10-Attach the light tails to the coresponding tails coming from the converter.
11-Attach the neutral and hot wires
12-Flip switch to make sure it all works
13-Close everything up.

And that's it.

I purchased these to retrofit older non-standard sized troffers that had their transformers go bad. The retrofit light bars were just as advertised and installed very quickly. The magnet based mounting worked great and allows for easy positioning of the LED drivers and light bars. The basement is now bright and the wife is happy. I will be buying more, this time for my workshop since those fixtures don't hold the tubes in well. The LED retrofit light bar kits will be the answer again. Wonderful product.

I had a 4 foot flourescent fixture that I
did not want to change in my garage, but wanted led lighting. Very easy to remove old ballast and wire direct to the Led light bars. I was skeptical mounting everything with the magnets but they are very strong. I the only thing I would suggest is to put some kind of instructions in the box for those not familiar with lighting or electricity.

This kit was a test to retrofit some 1960/70 vintage 1x4 two tube fluorescent fixtures that had previously been updated to t-8 tubes from the original t-12’s (?) in our residential game room. Following the simple instructions, we were able to convert (2) 1x4 fixtures (total 4 tubes) using a single driver and (2) 4 foot light bars (the two fixtures were ganged end to end) in about 15 minutes. And we have more light than the “tired” fixtures where providing! Thanks! Time to order a few more and finish the rest of the room.

I like these kits. Only takes a few minutes to kill the power to the light, drop out the bulbs, clip wires and drop out the old ballast, wire in the new LED power brick, plug in the LEDs and button it up. Bright nice light and cheap to run.

I had three Troffers in my basement and the ballast and bulbs went bad. I didn't want to have to rewire a new ballast so I looked into how complicated it would be to switch to LEDs. I saw some YouTube Videos and came across LED Waves demo in converting to LED. It looked easy enough and the price was amazing! So, I bit the bullet and ordered three sets. They weren't kidding when they said it was easy to install. I cut out the ballast, mounted the magnetic components and wired to the existing power using wire nuts. My basement has never been so bright. No more doing laundry in the dark. Full disclosure: I'm not very handy and even _I_ could install these bad boys in about 20 minutes. Awesome job guys!

Magnetic mounting really great, will reduce installation time a lot wish you had available 3x4’ QIK retrofits

In the past two weeks I have changed my entire house to LED lights this was the last one in the house I installed a two sets in the kitchen and they are little brighter than my old bulbs. I recommend it. I may make the change in my garage.

Installs with ease

QIK Troffer RETRoFIT LED Light Bars

After removing the old electrical wires and ballasts, the new LED kit fit my existing fixture easily. The 2 light strips are warm and equal or brighter than my old four x 4 foot fluorescent tubes. An excellent product at a reasonable price.

These led light far exceeded my expectations. Installed the led lights without any tools. Upgraded each light in under 15 minutes. Highly recommend theses leds to anyone wanting to upgrade old florescent tube troffers. Would buy again.

Works great and installs in minutes

Got this one kit as a test and I liked it for the good quality, great price, and easy install. I ordered enough to convert the rest of my basement from fluorescent to LEDs. This was supposed to be one of my major projects this year for the house and these kits made easy and cheap. Thanks LED Waves for the great product and super fast shipping on the second order.

I have installed 6 of these kits so far and like other reviewers have mentioned they are very quick to assemble. They work great in my garage here in upstate NY where the fluorescent bulbs in winter would take forever to light in a cold garage, these turn on instantly and theres no buzzing or flicker like the t12 bulbs i replaced. In the doorway from home to garage troffer I placed 4 strips to make it a little brighter and am thinking of placing 4 strips in the other 5 troffers to maximize the brightness in the garage. I cant speak to the longevity of the product as i have only had them installed for less than a week but i have absolutely no complaints thus far. Great Product

An incredibly great solution. Five minutes start to finish.
I removed the bulbs, ballast, and tombstones, and placed the magnetic mounted light strips and led power supply in place, then wired the two power wires (use a tester {sniffer}), done. The magnets hold well, but if you want to fasten them, just run in a self tapping screw through the fastening tab that is located at each end of the light strip.
What I like best is that the energy wasting ballast is gone, and the danger of someone falling off a ladder from 110 volt electrical shock when someone is putting a double end feed 4' led ballast bypass replacement bulb into a live fixture. Also, the chance of someone accidentally putting a regular fluorescent bulb in the fixture (even after labeling the fixture), can no longer happen.
I was amazed that because of the curved clear lens on the led strip, the light shines through the troffer lens, and widens the light appearance to that of a t-12 bulb.
Each light strip gives off the light equivalent of a new fluorescent bulb.
-Bob

Tried these Troffer retrofit kits. Bought for 6 fixtures to see if I like them since the flourescent fixtures were failing. Took me exactly 10 minutes to retrofit each fixture from setting up the ladder to removing the ladder. Easy and bright as hell. Love them and will slowly retrofit all my fixtures. Much easier and cheaper than replacing the entire fixture.

great, easy to install, 2 led are way brighter than 3 T8 tubes, I will buy more for the office

It was so easy A 10 year old could do it.It took less than 5 minutes each to do, I didn't even look at the instructions.

QIK Troffer RETRoFIT LED Light Bars

WORKED GREAT. EASY INSTALL